 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Solid State Relay OCMOS FET PS7141-1B,-2B,PS7141L-1B,-2B 6, 8-PIN DIP, 400 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch, 2-ch Optical Coupled MOS FET -NEPOC Series- DESCRIPTION The PS7141-1B, -2B and PS7141L-1B, -2B are solid state relays containing GaAs LEDs on the light emitting side (input side) and normally close (N.C.) contact MOS FETs on the output side. They are suitable for analog signal control because of their low offset and high linearity. The PS7141L-1B, -2B have a surface mount type lead. FEATURES * 1 channel type (1 b output) or 2 channel type (1 b + 1 b output) * Low LED operating current (IF = 2 mA) * Designed for AC/DC switching line changer * Small package (6, 8-pin DIP) * Low offset voltage * Ordering number of taping product : PS7141L-1B-E3, E4: 1 000 pcs/reel : PS7141L-2B-E3, E4: 1 000 pcs/reel APPLICATIONS * Exchange equipment * Measurement equipment * FA/OA equipment Document No. PN10279EJ02V0DS (2nd edition) Date Published July 2006 NS CP(K) The mark 1997, 2006 PS7141-1B,-2B,PS7141L-1B,-2B PACKAGE DIMENSIONS (in millimeters) PS7141-1B TOP VIEW 9.250.5 PS7141L-1B TOP VIEW 9.250.5 6 5 4 6 5 4 1 1. 2. 3. 4. 5. 6. 2 3 1. 2. 3. 4. 5. 6. 1 2 3 LED Anode LED Cathode NC MOS FET Drain MOS FET Source MOS FET Drain LED Anode LED Cathode NC MOS FET Drain MOS FET Source MOS FET Drain 7.62 6.50.5 6.50.5 3.30.3 4.150.3 3.50.3 3.50.3 1.340.1 0.25 M 0 to 15 2.54 2.54 0.90.25 9.600.4 0.50.1 1.340.1 0.25 M PS7141-2B TOP VIEW 9.250.5 PS7141L-2B TOP VIEW 5 9.250.5 8 7 6 8 7 6 5 1 2 3 4 1 2 3 4 1. LED Anode 2. LED Cathode 3. LED Anode 4. LED Cathode 5. MOS FET 6. MOS FET 7. MOS FET 8. MOS FET 1. LED Anode 2. LED Cathode 3. LED Anode 4. LED Cathode 5. MOS FET 6. MOS FET 7. MOS FET 8. MOS FET 7.62 6.50.5 6.50.5 3.30.3 4.150.3 3.50.3 3.50.3 1.340.1 0.25 M 0 to 15 2.54 2.54 0.90.25 9.600.4 0.50.1 1.340.1 0.25 M 2 Data Sheet PN10279EJ02V0DS 0.10+0.10 -0.05 0.10+0.10 -0.05 PS7141-1B,-2B,PS7141L-1B,-2B MARKING EXAMPLE PS7141-1B No. 1 pin Mark No. 1 pin Mark PS7141-2B PS7141-1B NL601 Country Assembled Type Number Assembly Lot PS7141-2B NL601 Country Assembled Type Number Assembly Lot N L 6 01 Week Assembled Year Assembled (Last 1 Digit) N L 6 01 Week Assembled Year Assembled (Last 1 Digit) In-house Code (L: Pb-Free) Rank Code In-house Code (L: Pb-Free) Rank Code Data Sheet PN10279EJ02V0DS 3 PS7141-1B,-2B,PS7141L-1B,-2B ORDERING INFORMATION Part Number Order Number Solder Plating Specification PS7141-1B PS7141L-1B PS7141L-1B-E3 PS7141L-1B-E4 PS7141-2B PS7141L-2B PS7141L-2B-E3 PS7141L-2B-E4 PS7141-1B-A PS7141L-1B-A PS7141L-1B-E3-A PS7141L-1B-E4-A PS7141-2B-A PS7141L-2B-A PS7141L-2B-E3-A PS7141L-2B-E4-A Embossed Tape 1 000 pcs/reel Magazine case 50 pcs PS7141-2B Pb-Free Magazine case 50 pcs Packing Style Safety Standard Approval Application Part Number *1 Standard products PS7141-1B (UL, BSI, CSA Embossed Tape 1 000 pcs/reel approved) *1 For the application of the Safety Standard, following part number should be used. 4 Data Sheet PN10279EJ02V0DS PS7141-1B,-2B,PS7141L-1B,-2B ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Ratings Parameter Symbol PS7141-1B, PS7141L-1B PS7141-2B, PS7141L-2B Unit Diode Forward Current (DC) Reverse Voltage Power Dissipation Peak Forward Current *1 IF VR PD IFP VL 50 5.0 50 1 400 150 200 300 - - 300 mA/ch V mW/ch A/ch V mA/ch MOS FET Break Down Voltage Continuous Load Current *2 Connection A Connection B Connection C IL Pulse Load Current *3 ILP mA/ch (AC/DC Connection) Power Dissipation Isolation Voltage *4 PD BV PT TA Tstg 560 1 500 610 -40 to +85 375 mW/ch Vr.m.s. Total Power Dissipation Operating Ambient Temperature Storage Temperature 850 mW C C -40 to +100 *1 PW = 100 s, Duty Cycle = 1% *2 Conditions: IF 2 mA. The following types of load connections are available. 1 2 3 1 2 3 1 2 3 1 2 3 6 5 4 6 5 4 6 5 4 6 5 IL L - + VL (DC) Connection A IL VL (AC/DC) L L + VL (DC) - IL Connection B IL L IL + IL Connection C + VL (DC) - 4 IL *3 PW = 100 ms, 1 shot *4 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output Pins 1-3 shorted together, 4-6 shorted together. (PS7141-1B) Pins 1-4 shorted together, 5-8 shorted together. (PS7141-2B) Data Sheet PN10279EJ02V0DS 5 PS7141-1B,-2B,PS7141L-1B,-2B RECOMMENDED OPERATING CONDITIONS (TA = 25C) Parameter LED Operating Current LED Off Voltage Symbol IF VF MIN. 2 0 TYP. 10 MAX. 20 0.5 Unit mA V ELECTRICAL CHARACTERISTICS (TA = 25C) Conditions Parameter Symbol PS7141-1B, PS7141L-1B Diode Forward Voltage Reverse Current MOS FET Off-state Leakage Current Output Capacitance Coupled LED Off-state Current On-state Resistance Cout IFoff Ron1 Ron2 Turn-on Time *1, 2 PS7141-2B, PS7141L-2B MIN. TYP. MAX. Unit VF IR ILoff IF = 10 mA VR = 5 V IF = 10 mA, VD = 400 V 1.2 1.4 5.0 V A A 0.03 1.0 VD = 0 V, f = 1 MHz, IF = 10 mA IL = 150 mA IF = 0 mA, IL = 10 mA IF = 0 mA, IL = 150 mA, t 10 ms IF = 10 mA, VO = 5 V, IF = 10 mA, VO = 5 V, RL = 500 , PW 10 ms 10 9 185 2.0 20 16 0.02 30 25 0.2 pF/ch mA ton ms Turn-off Time *1, 2 toff RL = 1.5 k, PW 10 ms 0.2 1.0 Isolation Resistance Isolation Capacitance RI-O CI-O VI-O = 1.0 kVDC V = 0 V, f = 1 MHz 1.1 pF/ch *1 Test Circuit for Switching Time IF Pulse Input VL Input 50 % 0 VO = 5 V Input monitor VO monitor Output 90 % Rin RL toff ton 10 % *2 The turn-on time and turn-off time are specified as input-pulse width 10 ms. Be aware that when the device operates with an input-pulse width less than 10 ms, the turn-on time and turn-off time will increase. 6 Data Sheet PN10279EJ02V0DS PS7141-1B,-2B,PS7141L-1B,-2B TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 100 Maximum Forward Current IF (mA) Maximum Load Current IL (mA) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 300 80 200 60 40 100 20 0 -25 0 25 50 7585 100 0 -25 0 25 50 75 85 100 Ambient Temperature TA (C) Ambient Temperature TA (C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE 1.6 Output Capacitance Cout (pF) OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 200 f = 1 MHz Forward Voltage VF (V) 1.4 IF = 50 mA 150 1.2 30 mA 20 mA 10 mA 5 mA 1 mA 100 1.0 50 0.8 -25 0 25 50 75 100 0 20 40 60 80 100 120 Ambient Temperature TA (C) Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE 10-5 Off-state Leakage Current ILoff (A) LOAD CURRENT vs. LOAD VOLTAGE 200 IF = 0 mA IF = 10 mA TA = 85 C Load Current IL (mA) 10-6 100 10-7 25 C -4.0 -2.0 -100 0 2.0 4.0 10-8 10-9 0 100 200 300 400 500 -200 Applied Voltage VD (V) Load Voltage VL (V) Remark The graphs indicate nominal characteristics. Data Sheet PN10279EJ02V0DS 7 PS7141-1B,-2B,PS7141L-1B,-2B NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE 3.0 Normalized On-state Resistance Ron ON-STATE RESISTANCE DISTRIBUTION 30 n = 50 pcs, IF = 0 mA, IL = 10 mA 2.5 2.0 1.5 1.0 0.5 0.0 -25 Normalized to 1.0 at TA = 25 C, IF = 0 mA, IL = 10 mA Number (pcs) 25 20 15 10 5 0 0 25 50 75 100 18 22 Ambient Temperature TA (C) On-state Resistance Ron () TURN-ON TIME vs. FORWARD CURRENT 1.2 VO = 5 V 1.0 Turn-on Time ton (ms) Turn-off Time toff (ms) TURN-OFF TIME vs. FORWARD CURRENT 1.2 VO = 5 V 1.0 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0 5 10 15 20 25 30 0 5 10 15 20 25 30 Forward Current IF (mA) Forward Current IF (mA) TURN-ON TIME DISTRIBUTION 30 25 Number (pcs) TURN-OFF TIME DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, VO = 5 V n = 50 pcs, IF = 10 mA, VO = 5 V Number (pcs) 25 20 15 10 5 0 20 15 10 5 0 0.02 0.04 0.2 0.3 Turn-on Time ton (ms) Turn-off Time toff (ms) Remark The graphs indicate nominal characteristics. 8 Data Sheet PN10279EJ02V0DS PS7141-1B,-2B,PS7141L-1B,-2B NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 3.0 NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE 3.0 Normalized Turn-on Time ton Normalized Turn-off Time toff 2.5 2.0 1.5 1.0 0.5 0.0 -25 Normalized to 1.0 at TA = 25 C, IF = 10 mA, VO = 5 V 2.5 2.0 1.5 1.0 0.5 0.0 -25 Normalized to 1.0 at TA = 25 C, IF = 10 mA, VO = 5 V 0 25 50 75 100 0 25 50 75 100 Ambient Temperature TA (C) Ambient Temperature TA (C) Remark The graphs indicate nominal characteristics. Data Sheet PN10279EJ02V0DS 9 PS7141-1B,-2B,PS7141L-1B,-2B TAPING SPECIFICATIONS (in millimeters) Outline and Dimensions (Tape) 2.00.1 4.00.1 1.5 +0.1 -0 1.750.1 4.5 MAX. 16.00.3 7.50.1 10.30.1 1.550.1 12.00.1 10.40.1 0.3 4.00.1 Tape Direction PS7141L-1B-E3 PS7141L-2B-E3 PS7141L-1B-E4 PS7141L-2B-E4 Outline and Dimensions (Reel) 2.00.5 2.00.5 13.00.2 3302.0 1001.0 R 1.0 21.00.8 17.51.0 21.51.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange 10 Data Sheet PN10279EJ02V0DS PS7141-1B,-2B,PS7141L-1B,-2B RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature * Time of temperature higher than 220C * Time to preheat temperature from 120 to 180C * Number of reflows * Flux 260C or below (package surface temperature) 10 seconds or less 60 seconds or less 12030 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (C) (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature * Time * Preheating conditions * Number of times * Flux 260C or below (molten solder temperature) 10 seconds or less 120C or below (package surface temperature) One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Data Sheet PN10279EJ02V0DS 11 PS7141-1B,-2B,PS7141L-1B,-2B USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. 12 Data Sheet PN10279EJ02V0DS PS7141-1B,-2B,PS7141L-1B,-2B * The information in this document is current as of July, 2006. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1 Data Sheet PN10279EJ02V0DS 13 PS7141-1B,-2B,PS7141L-1B,-2B Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. For further information, please contact NEC Compound Semiconductor Devices Hong Kong Limited E-mail: contact@ncsd-hk.necel.com Hong Kong Head Office TEL: +852-3107-7303 FAX: +852-3107-7309 Taipei Branch Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Korea Branch Office TEL: +82-2-558-2120 FAX: +82-2-558-5209 NEC Electronics (Europe) GmbH http://www.eu.necel.com/ TEL: +49-211-6503-0 FAX: +49-211-6503-1327 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 Compound Semiconductor Devices Division NEC Electronics Corporation URL: http://www.ncsd.necel.com/ 0604 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability. |
Price & Availability of PS7141-2B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |